To use this feature, you have to remove the configuration jumper and put the BIOS disk in the drive. The motherboard has a feature that allows it to do an emergency recovery of the BIOS in case something goes wrong. However, there is a way to bypass this check. Using the normal upgrade utility, you won't be able to upgrade the BIOS because of this check. 10A indicates that the BIOS is from Dell, and that the BIOS version is P09. Here is an example of one of the Dell headers: However, on an OEM machine, the BIOS header is different. 86A indicates that the BIOS is from Intel. Here are some of the BIOS codes for various OEM's which use the AL440LX: When the Intel program starts to upgrade the BIOS, it checks the BIOS header. What does this mean and what am I doing wrong? ![]() (H 48):Invalid reserved string in flash image header I get the following error message when I try to update my BIOS using the BIOS from Intel's site: Can I use the BIOS updates from the Intel Site? ![]() I have an OEM version of the AL440LX motherboard from a company such as DELL or NEC. Here is some help in that area, I think it found it in a newsgroup post a few years ago, perhaps a google search with some of the text stings might find that post for you: I just can't remember, it was many moons and many motherboards ago. On second thought, maybe after editing the bios and having the board seem "dead", I might have then used the recovery jumper to flash the (unedited original version of) intel bios, NOT the gateway bios. Well, it was easily enough recovered by reflashing the Gateway bios, but you'd be taking a risk. I once tried this and ended up with a dead board. you could open up the bios file with a hex editor, search for and change the intel vendor id string to match that of gateway, and then the flasher "should" be satisfied. There is another option, but I hesitated to mention it before because it's more risky, I try not to risk other people's hardware if it can be avoided. Perhaps your particular motherboard just won't accept it, I don't know what to suggest from here, except to review this intel page and be sure that all the files from the intel bios are decompressed, none in package-for-download format still, but from your accounts it seems that this isn't the problem. It may be easy to tell whether the intel bios "took", because they often replace the Gateway splash logo with an intel logo, but YMMV. I do know that booting with the configuration jumper in it's normal position isn't the same, I've previously flashed an old Gateway AL440LX to the Intel AL440LX bios and found that the jumper had to be changed to do it. I do know that it will beep (maybe only once) when it's working, but I don't know about repeated beeping. It's a handy little tool to have around, you might want it keep it after swapping the bios. I'd link to it on Intel's site if i knew where it was, but far easier to just put on server for you, then u can just put it in a folder, extract, see the Readme.txt: ![]() Simplier solution is to use intel's NT bootable floppy maker (83KB). Sometimes there will also be "drvspace.bin", but it's only needed for accessing drivespace-compressed volumes, can be deleted to free up 68KB. IO.SYS (can't be just copied, must be properly written to front of disk with special util or tools like "sys", "format /s" command, etc) In general Gateway seems to choose not to release the later BIOS versions for their products, the last Intel version is typically the newest there is. ![]() You might be able to compare version release notes for both and see which releases correspond to each other. Intel sends the bios and a configuration tool or two, Gateway chooses what "features" to make hidden or available, but same underlying code, bugs, fixes per version.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |